CSW62AM Double-Speed Chain Conveyor
|
A new double-speed chain conveyor with intermediate drive is now available!
With intermediate drive, there is no shaft connecting the driven sprockets, allowing for space between the frames at both ends. This makes it easy to use in combination with other equipment for convex workpiece transport, lifting workpieces from below, or installing conveyors to reduce wobble during transfers.
|
< Features >
| Since the drive shaft is centrally located and the driven sprockets are not connected to each other, space is created between the frames at both ends, making it easy to combine with other equipment in both upstream and downstream processes. |
| Stable transport is possible even when the conveying direction is switched forward or backward. |
| The standard roller roller, driver part cover, and pillow cover are available as standard products. |
| The position of the drive unit can be custom-specified, but it cannot be adjusted after production. |
| It is suitable as an accumulator conveyor for transporting wide workpieces and pallets. |
| By attaching stopper mechanisms and positioning mechanisms to the conveyor frame, the line can be configured as the main conveyor of the free-flow line. |
< main unit specifications>
| Inter-chain pitch |
80～500mm |
| Sprocket Length |
850～5,000mm |
| Motor output |
60W,90W,200W |
| Motor voltage |
Single-phase 100V, 200V
, three-phase 200V |
| transport speed |
50Hz |
0.068～0.670m/sec |
| 60Hz |
0.080～0.580m/sec |
< Chain Specification>
| Conveyor surface material (roller) |
enterprise plastic |
| pitch |
19.05mm |
| Inner large-diameter roller width |
8.0mm |
| Inner large diameter roller diameter |
18.3mm |
| Outer small-diameter roller width |
4.0mm |
| Outer small roller diameter |
11.91mm |
| heat resistance |
-10℃～60℃ |
|
